Hello all,
I have been running 5.05 quite happily since 2018. Today, I experienced a game crash during a loading screen. After rebooting the PS4, I have not been able to successfully load the exploit.
When I select 'Mira+HEN' from the exploit selection page:
Error 404. Nothing matches the given URI.
The same message is returned for all selections on that page.
I have re-connected my PS4 to two different WiFi networks, using the only DNS values I have ever used (108.61.128.158). The PS4 passes the network test at the end of the setup.
On rebooting, I get this error message (sometimes)
Cannot connect to network: NW 31294-9
After some Googling, not sure what to do next. The PS4 passes the 'test connection' process. This is not a new router and I haven't changed any settings, I have been using the same setup for many months.
Can anybody recommend some troubleshooting steps?
Many thanks
Internet Connection: On
COnnection Method: Wi-Fi
Wi-Fi Frequency Bands: Automatic
Signal Strength: 100%
Wi-Fi Frequent Band In Use: 5 GHz
Security Method: WPA2-PSK (AES)
IP Address Settings: Automatic
Subnet Mask: 255.255.0.0
Default Gateway: 192.168.10.231
Primary DNS: 108.61.128.145
Secondary DNS: 165.227.83.145
MTU: Automatic
Proxy Server: Do not use
NAT Type: Failed*
Not sure if NAT should have failed..
I have been running 5.05 quite happily since 2018. Today, I experienced a game crash during a loading screen. After rebooting the PS4, I have not been able to successfully load the exploit.
When I select 'Mira+HEN' from the exploit selection page:
Error 404. Nothing matches the given URI.
The same message is returned for all selections on that page.
I have re-connected my PS4 to two different WiFi networks, using the only DNS values I have ever used (108.61.128.158). The PS4 passes the network test at the end of the setup.
On rebooting, I get this error message (sometimes)
Cannot connect to network: NW 31294-9
After some Googling, not sure what to do next. The PS4 passes the 'test connection' process. This is not a new router and I haven't changed any settings, I have been using the same setup for many months.
Can anybody recommend some troubleshooting steps?
Many thanks
Internet Connection: On
COnnection Method: Wi-Fi
Wi-Fi Frequency Bands: Automatic
Signal Strength: 100%
Wi-Fi Frequent Band In Use: 5 GHz
Security Method: WPA2-PSK (AES)
IP Address Settings: Automatic
Subnet Mask: 255.255.0.0
Default Gateway: 192.168.10.231
Primary DNS: 108.61.128.145
Secondary DNS: 165.227.83.145
MTU: Automatic
Proxy Server: Do not use
NAT Type: Failed*
Not sure if NAT should have failed..
Last edited: